Instruction book on ring spinning
Date: 2010-08-13T00:00:00+00:00
Keywords: Spinning

The Project Gutenberg eBook of Instruction book on ring spinning

This ebook is for the use of anyone anywhere in the United States and most other parts of the world at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this ebook or online at www.gutenberg.org. If you are not located in the United States, you will have to check the laws of the country where you are located before using this eBook.

Title: Instruction book on ring spinning

Author: Francis L. Lincoln

Release date: August 13, 2010 [eBook #33424]

Language: English

Credits: Produced by The Online Distributed Proofreading Team at
http://www.pgdp.net (This file was produced from images
generously made available by The Internet Archive/American
Libraries.)

*** START OF THE PROJECT GUTENBERG EBOOK INSTRUCTION BOOK ON RING SPINNING ***

INSTRUCTION BOOK

ON

RING SPINNING

BY

FRANCIS L. LINCOLN.

WARREN, MASS.
HERALD PRINTING COMPANY.
1885.

Entered according to Act of Congress, in the year 1885,
By FRANCIS L. LINCOLN,
In the Office of the Librarian of Congress at Washington.

PREFACE.

The object of this little book is to give help and instruction to those who are engaged in this department of mill work. It imparts that knowledge which only years of thorough study and observation can give. It has been carefully prepared by an experienced Spinner, who has given years of study to it, in order to benefit and help those who are interested in the Spinning department.

Francis L. Lincoln, Author.

CONTENTS.

1. | The First Thing to do when going into a strange room to take charge.
2. | To see that your Draughts, Twists and Travelers are right, etc.
3. | How to pack Yarn closely on the Bobbin.
4. | To see that your Thread Guides are
5. | About Spindles, Rings, and Steel Rolls.
6. | How Top Rolls should be kept in order to make good yarn weight on top rolls, etc.
7. | Bands; how they should be run, etc.
8. | What to do when you have long staple Cotton.
9. | What Twists should be in the hank roving, and why.
10. | How Roving should be when run double, and how to get it single.
11. | How to run colored Roving double on spinning frames.
12. | How Waste should be run through the lappers, etc.
13. | How to prove that uneven work is not made on Spinning Frames.
14. | How bunches can be made on Spinning Frames and Spoolers.
15. | How coarse threads are made.
16. | Caution to be observed in changing from one number of yarn to another.
17. | What to do when Cotton is poor.
18. | Why it is cheaper for the Company to wind the yarn hard on the bobbins and spools.
19. | If yarn is knitted, where the trouble is.
20. | How snarled yarn is made, etc.
21. | How to avoid making lap waste in spinning room.
22. | How to avoid making roving waste in spinning room.
23. | When wastes should be picked up.
24. | What the draught change gear should be, when you run colored work.
25. | System in doffing the frames and gauge to go by.
26. | How to get speed of cylinder and spindles.
27. | To know what pulley will drive your cylinder faster or slower.
28. | How to take up a belt or let it out, when you change pulleys.
29. | Rule for finding what number of twists to the inch for any number of yarn.
30. | Square Root of numbers, from 18 to 30, with twist.
31. | The rule for finding the draught for any number of yarn.
32. | The gear required to run another number on the same hank roving.
33. | The hank roving required to run another number of yarn with same draught.

34.

Rule to find the draught change gear required, when changing from one number to another on a frame or mule, when the draught and roving both have to be altered.

35. | How to find the twist gear by square root of the number.
36. | How to get twist pulley for another number of yarn.
37. | How to get the exact twist in yarn.
38. | How to get the weight on top rolls.
39. | Square Root table for the twist of yarn.

Instruction Book.

THE FIRST THING.

1. The first thing to do when going into a strange room to take charge, is to learn the names and dispositions of your help, and their ability. By doing this it will save you some trouble. Do not turn off help the first day you go into a room to take charge. Get the good will of your help and keep them; and when they learn your ways and know you mean just what you say, every thing will be pleasant for them and you also.

DRAUGHTS, TWISTS AND TRAVELERS.

2. To see that your Draughts, Twists and Travelers are right for the numbers of yarns you are spinning. Travelers govern the twist. When the bobbins are full there is more twist in than when it first starts. Have them heavy enough to keep the ends straight. If Travelers are poor the work will run bad. Change them on fine work once in three or four months, clean them every doff, and touch the ring with a little oily waste. If Draught gears bind, spinners cannot keep their ends up.

PACKING YARN ON BOBBINS.

3. To see that the yarn is packed closely on the bobbin. The way to tell is to put an empty bobbin on, and run one layer of yarn upon it; if the threads do not lay close together, run your motion slower. In this way you get more length of yarn to the bobbin.

THREAD GUIDES.

4. To see that your thread guides are central with the bobbin below. If a crease has been made by the thread running through it, take it out and put in a new one.

SPINDLES.

5. To see that the spindles are in the center of the rings, and that your rings are in good condition. A poor ring will make two-thirds more waste than a good one, and the frame requires three times the cleaning that it does with a good ring. Slip your finger round inside of the ring; if it feels notchy the ring is poor. Take it out. Rings should be looked over every time you scour. That should be every six months. Steel rolls should be rubbed with one-twenty emery cloth once a year, with a little oil.

TOP ROLLS.

6. See that your top rolls are kept in good condition. Look them all over once a month if that will do, if not look them over oftener. New rolls should always be put in the front, poorest ones in the back. New rolls should always be calipered at each end; if they do not caliper the same at each end of the roll, the roll should not be used, as it would spoil the yarn, and spinners could not keep up their ends. New rolls should be oiled when they are put in to run. Neck of front rolls should be oiled morning and noon. All of the rolls should be oiled once a week. The weight should be the same on all top rolls. In order to do this your saddles must be all alike, and must not hug the neck of the roll. Stirrups should be all of the same length and style. The levers should be all of the same length and style; and weights should be all of the same heft. Stirrups must clear the rolls, and use double saddles. Shell rolls should be cleaned and oiled once a month, with lard oil. Use vinegar with one-third water to clean top rolls. Roller hooks should not be used on steel rolls.

CARRYING.

7. A small band carrying one spindle is better than a large band carrying a number of spindles. It makes better yarn, and not one-third the waste. Bands should be put on tight; and the spinner should call the band boy soon as one comes off, to put on a new one. Bands should all be looked over once a week, and all slack ones cut off and new ones put on. A slack band makes soft yarn. If your frame does not run up to speed, you will get soft yarn. A dry spindle will also make soft yarn. Keep your spindles properly oiled.

LONG STAPLE COTTON.

8. For long staple cotton you must spread the bottom and top rolls a little to avoid cockley yarn. Long staple cotton does not require so much twist on spinning as short.

ROVING.

9. Too much twist in roving makes bad yarn, and spoils the top rolls on spinning frames. The square root of the number is about the twist for roving. It gives the Carder a chance to keep up with the spinning, and gives the Spinner a chance to make a better quality of yarn. If there is too much twist in the roving, you cannot draw it on spinning frames without spreading the rolls; but then it will spoil the top rolls. Keep your numbers even if you can. Size from every fine speeder and average it every day, and examine the yarn every time you size, to see if it is good. By doing so it may save you considerable trouble.

TWO-ROVING.

10. In running two-roving together, always have them of the same hank, because if one is of one hank, and the other of another, there will be more twist in one than in the other, and will not make as good yarn, and will not draw as even as they would if they were of the same twist or hank. To know what the two hanks would be single; you must add the two hanks together, and divide that by four to get it single.

DOUBLE WORK.

11. The way to run double work on spinning frames. Have the white put in the top, if you have double creels; and colored work in the bottom. Piece the back roving in the top with the back roving in the bottom. Front in with front makes the yarn more even.

WASTE.

12. Waste must be run through the lapper all by itself, not mix it with the good cotton; and if one section of cards will run one lap a day and keep the waste up, you may run one; if it makes two laps put on two sections, (one lap on each section,) and the work or yarn will be more even.

UNEVEN WORK.

13. How to prove that uneven work is not made on spinning frames. See that your draught gears do not bind; if they do, you will have uneven yarn. Put in new rolls in front, middle and back. See that your frame runs up to right speed and roller belt is tight. See that the rings and travelers are good. See that stirrups and saddles are in place. Then if your yarn is uneven the trouble is in the carding room. Roving bobbins should be marked for each speeder; and the spinner run each separate on his frames. Then if you had bad work you could tell very quick which speeder it belonged to.

BUNCHES.

14. How bunches can be made on spinning frames. By piecing on roving and leaving the end to run through double. By piecing up ends and not twisting on smoothly. By wiping out the roving rack and the waste catching on the roving and running through the rolls. By wiping off thread-boards, waste catching on to the ends and spinning. By rolls not being kept clean and oiled. By spinners not being careful enough when they clean their rolls. By spinners brushing and cleaning their frames. By brushing down over head. By spinners not keeping their clearers clean. The carder should be just as particular about making his roving as the spinner is about making his yarn; then there will be good work all through. A dry front roll will make bunches on spinning frames, and will do the same on speeders. Sweepers should not blow their waste under the frames. Bunches can be made on spoolers by thread guides not being wide enough for the threads to pass through. A bunch will collect and stop the spool. Spooler tenders lift it over on to the spool.

COARSE THREADS.

15. How coarse threads are made. First, by coarse roving; second by spinners letting two roving run through the guide; third, by one end catching on to another and running on to the bobbin; fourth, sometimes where there is two ends on one boss, one end will break and catch onto the other and spin. If the trouble is in the spinning, you untwist the thread and you will find two threads instead of one. If not two threads, the trouble is in the carding room.

CHANGING NUMBERS.

16. When you change from one number to another see that the motion runs right to pack the yarn closely on the bobbin; then have your travelers just heavy enough to keep the ends straight. By running a heavy traveler you pack the yarn harder on the bobbin. I do not believe in running a traveler heavy enough to pull down the ends, but heavy enough to keep the ends straight.

POOR COTTON.

17. When cotton is poor you may need a little more twist in the yarn; sometimes when cotton is poor, the warp spinning will run bad. In this case you may run your warp one number heavier and mule filling one number lighter. Waste work requires more twist than good cotton.

ECONOMY OF HEAVY TRAVELERS.

18. It is cheaper for the company to run heavy travelers, and wind the yarn hard on the bobbins and spools. You get more length of yarn and a better quality. Will not cost so much for spooling.

KNITTED YARN.

19. If the yarn is knitted the trouble is in the carding room, as you cannot make knitted yarn on spinning frames.

SNARLED YARN.

20. How snarled yarn is made. By spinners not finding the end and breaking a thread on the bobbin to piece up by. By having the taper shorter on top of the bobbin than on the bottom, so when the doffers take the full bobbins off, the thread pulls over the top and snarls. To avoid the above, lower the arm where it is attached to the frame, (the arm that the heart rider is attached to). About one-quarter of an inch will be enough. You want the taper longer at the top than at the bottom.

LAP WASTE.

21. How to avoid making lap waste in spinning room. By keeping spinners where their work is, and by not giving spinners any more work than they can keep up. By having good doffers and good starters. If doffers and starters are not good they will make more waste than their wages will come to. Doffers should wind the thread four times around the bobbin. Starters should not wind on to bobbins when there is yarn on to piece up by.

ROVING WASTE.

22. How to avoid making roving waste in spinning room. By letting it all run through the rolls into yarn. All bad roving should be sent back into the carding room, where it belongs, every day.

PICKING UP WASTES.

23. All wastes should be picked up, looked over, weighed and carried off where it belongs, every day. You will find it much better than the old way. Not so apt to accumulate.

COLORED WORK.

24. Colored work always runs heavy. You want one tooth less draught change gear than your hank roving figures for. But put in the same twist.

DOFFING.

25. System in doffing the frames. To save making waste and trouble in the room, doff every other row right through, then go back and doff the remaining rows through. In doffing this way the spinners can tend more sides and not make so much waste, as any spinner knows, or ought to know. Frames run better when half full than on an empty bobbin. One frame stopped at a time to doff, is all that ought to be permitted. From three to four minutes is long enough time to doff any frame with four doffers. The first frame should be filled to a gauge astride the bobbin. Do not go by the clock, as the yarn is sometimes heavy. This gauge is the best guide I ever had in doffing.

SPEED OF CYLINDER.

26. How to get speed of cylinder. See what main line runs; then get diameter of counter pulley that carries the cylinder below. The pulley above is called a driver. Then multiply the speed of main line by diameter of counter pulley that carries the cylinder, and divide that by the diameter of the pulley that is on the cylinder, which is called the driven. Then to get speed of spindles, get diameter of cylinder, and multiply the speed of cylinder by diameter of cylinder, and divide that by the diameter of the whorl.

SPEEDING PULLEYS.

27. To know what pulley will drive your cylinder faster or slower. Multiply the speed you would like to have it run, by diameter of pulley overhead, that carries the cylinder, and divide that by the speed you are now running. Will give you pulley required.

TAKING UP BELTS.

28. To know how to take up a belt, when you change pulleys. If your belt is tight enough with the pulley you now have on, for every inch that your pulley is smaller than you now have on, take out one inch and three-quarters of belting. If larger, right the reverse.

TWISTS.

29. To know what number of twists to the inch, for any number of yarn. On warp, multiply the square root of the number by 5. Frame filling by 4, and mule filling by 3-¼. For every ten numbers below thirty take away two twist to the inch. For every ten numbers above thirty, add two.

SQUARE ROOT.

30. Square Root of numbers from 18 to 30.—These twists are within a fraction.

NUMBERS | SQ ROOT | Warp Twist | Filling Twist
13 | 3.605 | 15 per inch | 11-½ per inch.
14 | 3.741 | 15-½ per inch. | 12 per inch.
14 | 3.741 | 15-½ per inch. | 12 per inch.
18 | 4.242 | 19 per inch. | 15 per inch.
19 | 4.359 | 19-½ per inch. | 15 per inch.
20 | 4.472 | 20-½ per inch. | 15-½ per inch.
21 | 4.582 | 21 per inch. | 16 per inch.
22 | 4.690 | 21-½ per inch. | 16-½ per inch.
23 | 4.796 | 22 per inch. | 17 per inch.
24 | 4.899 | 22-½ per inch. |
25 | 5.000 | 24 per inch. | 19 per inch.
26 | 5.099 | 24-½ per inch. |
27 | 5.196 | 25 per inch. | 19-¾ per inch.
28 | 5.291 | 25-½ per inch. | 21 per inch.
29 | 5.385 | 26 per inch. |
30 | 5.477 | 27-½ per inch. | 22 per inch.

DRAUGHT FOR YARN.

31. To know the draught for any number of yarn. Write the number you are spinning or want to spin, add two ciphers to it; divide that by the hank roving that you are spinning from, to get draught. Example; hank roving 225, No. yarn 18. Add two ciphers, (1800); divided by 225 gives 8 draught.

GEAR REQUIRED.

32. This is the way I was taught to figure draughts of different numbers of yarn. If you want to run another number with the same hank roving, multiply the smallest draught change gear by the number you are spinning, and divide that by the number you want to spin, and that will give you the gear required.

ROVING REQUIRED.

33. If you want to spin another number with same draught, write your number that you want to spin (as above) and divide that by the draught. That will give you hank roving required.

TO FIND DRAUGHT CHANGE GEAR.

34. Rule to find the draught change gear required. When you change from one number to another on a frame or mule, when the draught and roving both have to be changed, multiply the number of the yarn being spun by the hank roving desired, and that product by the number of teeth in the draught change gear; using that for a dividend. Then multiply the number of the yarn desired by the hank roving, using that for a divisor; that product divided will tell the draught change gear that is required.

TWIST GEAR.

35. The way I was taught to find the twist gear by square root of the number of yarn. Multiply the twist gear in use by the square root of the number being spun, and divide that product by the square root of the number you want to spin. That will give you the twist gear required.

TWIST PULLEY.

36. To get the twist pulley for another number of yarn. See what twist the pulley gives that you have on, and multiply the twist that you have in, by the pulley that is on, and divide that product by the twist you would like to put in to get the pulley required.

TWIST OF YARN.

37. To know how to get the exact twist in yarn. Have your roll belt tight, and band also. Count the revolutions of the spindle to the rollers once. Divide that by the circumference of the roll, which is 3-14/100 inches. Example. Say 86 turns to the rolls once. (3-14/100) 86.00 turns, (27-38/100) twists to the inch.

WEIGHT ON TOP ROLLS.

38. To know the weight on top rolls. You must measure the distance from where the stirrup is attached to the lever to where the wire is attached that holds the weight; then multiply the distance by whatever the weight weighs, and divide that product by the exact distance from where the lever is attached to the set screw, to where the stirrup is attached.

SQUARE ROOT TABLE FOR THE TWIST OF YARNS.

39

No. of Yarn | Square Root | No. of Yarn | Square Root | No. of Yarn | Square Root
1 | 1.000 | 31 | 5.567 | 61 | 7.810
2 | 1.414 | 32 | 5.656 | 62 | 7.874
3 | 1.732 | 33 | 5.744 | 63 | 7.937
4 | 2.000 | 34 | 5.830 | 64 | 8.000
5 | 2.236 | 35 | 5.916 | 65 | 8.062
6 | 2.449 | 36 | 6.000 | 66 | 8.124
7 | 2.645 | 37 | 6.082 | 67 | 8.185
8 | 2.828 | 38 | 6.164 | 68 | 8.246
9 | 3.000 | 39 | 6.244 | 69 | 8.306
10 | 3.162 | 40 | 6.324 | 70 | 8.366
11 | 3.316 | 41 | 6.403 | 71 | 8.426
12 | 3.464 | 42 | 6.480 | 72 | 8.485
13 | 3.605 | 43 | 6.557 | 73 | 8.544
14 | 3.741 | 44 | 6.633 | 74 | 8.602
15 | 3.872 | 45 | 6.708 | 75 | 8.660
16 | 4.000 | 46 | 6.782 | 76 | 8.717
17 | 4.123 | 47 | 6.855 | 77 | 8.774
18 | 4.242 | 48 | 6.928 | 78 | 8.831
19 | 4.358 | 49 | 7.000 | 79 | 8.888
20 | 4.472 | 50 | 7.071 | 80 | 8.944
21 | 4.582 | 51 | 7.141 | 81 | 9.000
22 | 4.690 | 52 | 7.211 | 82 | 9.055
23 | 4.795 | 53 | 7.280 | 83 | 9.110
24 | 4.898 | 54 | 7.348 | 84 | 9.165
25 | 5.000 | 55 | 7.416 | 85 | 9.219
26 | 5.099 | 56 | 7.483 | 86 | 9.273
27 | 5.196 | 57 | 7.549 | 87 | 9.327
28 | 5.291 | 58 | 7.615 | 88 | 9.380
29 | 5.385 | 59 | 7.681 | 89 | 9.433
30 | 5.477 | 60 | 7.745 | 90 | 9.486

If any Spinner purchasing this book has trouble with his work, he will receive aid from me (if in my power) by stating all particulars.

All orders for this book should be addressed to Francis L. Lincoln, P.O. Box 35, Warren, Mass.

Price One Dollar.

*** END OF THE PROJECT GUTENBERG EBOOK INSTRUCTION BOOK ON RING SPINNING ***

Updated editions will replace the previous one—the old editions will be renamed.

Creating the works from print editions not protected by U.S. copyright law means that no one owns a United States copyright in these works, so the Foundation (and you!) can copy and distribute it in the United States without permission and without paying copyright royalties. Special rules, set forth in the General Terms of Use part of this license, apply to copying and distributing Project Gutenberg™ electronic works to protect the PROJECT GUTENBERG™ concept and trademark. Project Gutenberg is a registered trademark, and may not be used if you charge for an eBook, except by following the terms of the trademark license, including paying royalties for use of the Project Gutenberg trademark. If you do not charge anything for copies of this eBook, complying with the trademark license is very easy. You may use this eBook for nearly any purpose such as creation of derivative works, reports, performances and research. Project Gutenberg eBooks may be modified and printed and given away—you may do practically ANYTHING in the United States with eBooks not protected by U.S. copyright law. Redistribution is subject to the trademark license, especially commercial redistribution.

START: FULL LICENSE

THE FULL PROJECT GUTENBERG LICENSE

PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK

To protect the Project Gutenberg™ mission of promoting the free distribution of electronic works, by using or distributing this work (or any other work associated in any way with the phrase “Project Gutenberg”), you agree to comply with all the terms of the Full Project Gutenberg™ License available with this file or online at www.gutenberg.org/license.

Section 1. General Terms of Use and Redistributing Project Gutenberg™ electronic works

1.A. By reading or using any part of this Project Gutenberg™ electronic work, you indicate that you have read, understand, agree to and accept all the terms of this license and intellectual property (trademark/copyright) agreement. If you do not agree to abide by all the terms of this agreement, you must cease using and return or destroy all copies of Project Gutenberg™ electronic works in your possession. If you paid a fee for obtaining a copy of or access to a Project Gutenberg™ electronic work and you do not agree to be bound by the terms of this agreement, you may obtain a refund from the person or entity to whom you paid the fee as set forth in paragraph 1.E.8.

1.B. “Project Gutenberg” is a registered trademark. It may only be used on or associated in any way with an electronic work by people who agree to be bound by the terms of this agreement. There are a few things that you can do with most Project Gutenberg™ electronic works even without complying with the full terms of this agreement. See paragraph 1.C below. There are a lot of things you can do with Project Gutenberg™ electronic works if you follow the terms of this agreement and help preserve free future access to Project Gutenberg™ electronic works. See paragraph 1.E below.

1.C. The Project Gutenberg Literary Archive Foundation (“the Foundation” or PGLAF), owns a compilation copyright in the collection of Project Gutenberg™ electronic works. Nearly all the individual works in the collection are in the public domain in the United States. If an individual work is unprotected by copyright law in the United States and you are located in the United States, we do not claim a right to prevent you from copying, distributing, performing, displaying or creating derivative works based on the work as long as all references to Project Gutenberg are removed. Of course, we hope that you will support the Project Gutenberg™ mission of promoting free access to electronic works by freely sharing Project Gutenberg™ works in compliance with the terms of this agreement for keeping the Project Gutenberg™ name associated with the work. You can easily comply with the terms of this agreement by keeping this work in the same format with its attached full Project Gutenberg™ License when you share it without charge with others.

1.D. The copyright laws of the place where you are located also govern what you can do with this work. Copyright laws in most countries are in a constant state of change. If you are outside the United States, check the laws of your country in addition to the terms of this agreement before downloading, copying, displaying, performing, distributing or creating derivative works based on this work or any other Project Gutenberg™ work. The Foundation makes no representations concerning the copyright status of any work in any country other than the United States.

1.E. Unless you have removed all references to Project Gutenberg:

1.E.1. The following sentence, with active links to, or other immediate access to, the full Project Gutenberg™ License must appear prominently whenever any copy of a Project Gutenberg™ work (any work on which the phrase “Project Gutenberg” appears, or with which the phrase “Project Gutenberg” is associated) is accessed, displayed, performed, viewed, copied or distributed:

This eBook is for the use of anyone anywhere in the United States and most other parts of the world at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this eBook or online at www.gutenberg.org. If you are not located in the United States, you will have to check the laws of the country where you are located before using this eBook.

1.E.2. If an individual Project Gutenberg™ electronic work is derived from texts not protected by U.S. copyright law (does not contain a notice indicating that it is posted with permission of the copyright holder), the work can be copied and distributed to anyone in the United States without paying any fees or charges. If you are redistributing or providing access to a work with the phrase “Project Gutenberg” associated with or appearing on the work, you must comply either with the requirements of paragraphs 1.E.1 through 1.E.7 or obtain permission for the use of the work and the Project Gutenberg™ trademark as set forth in paragraphs 1.E.8 or 1.E.9.

1.E.3. If an individual Project Gutenberg™ electronic work is posted with the permission of the copyright holder, your use and distribution must comply with both paragraphs 1.E.1 through 1.E.7 and any additional terms imposed by the copyright holder. Additional terms will be linked to the Project Gutenberg™ License for all works posted with the permission of the copyright holder found at the beginning of this work.

1.E.4. Do not unlink or detach or remove the full Project Gutenberg™ License terms from this work, or any files containing a part of this work or any other work associated with Project Gutenberg™.

1.E.5. Do not copy, display, perform, distribute or redistribute this electronic work, or any part of this electronic work, without prominently displaying the sentence set forth in paragraph 1.E.1 with active links or immediate access to the full terms of the Project Gutenberg™ License.

1.E.6. You may convert to and distribute this work in any binary, compressed, marked up, nonproprietary or proprietary form, including any word processing or hypertext form. However, if you provide access to or distribute copies of a Project Gutenberg™ work in a format other than “Plain Vanilla ASCII” or other format used in the official version posted on the official Project Gutenberg™ website (www.gutenberg.org), you must, at no additional cost, fee or expense to the user, provide a copy, a means of exporting a copy, or a means of obtaining a copy upon request, of the work in its original “Plain Vanilla ASCII” or other form. Any alternate format must include the full Project Gutenberg™ License as specified in paragraph 1.E.1.

1.E.7. Do not charge a fee for access to, viewing, displaying, performing, copying or distributing any Project Gutenberg™ works unless you comply with paragraph 1.E.8 or 1.E.9.

1.E.8. You may charge a reasonable fee for copies of or providing access to or distributing Project Gutenberg™ electronic works provided that:

- • You pay a royalty fee of 20% of the gross profits you derive from the use of Project Gutenberg™ works calculated using the method you already use to calculate your applicable taxes. The fee is owed to the owner of the Project Gutenberg™ trademark, but he has agreed to donate royalties under this paragraph to the Project Gutenberg Literary Archive Foundation. Royalty payments must be paid within 60 days following each date on which you prepare (or are legally required to prepare) your periodic tax returns. Royalty payments should be clearly marked as such and sent to the Project Gutenberg Literary Archive Foundation at the address specified in Section 4, “Information about donations to the Project Gutenberg Literary Archive Foundation.”

- • You provide a full refund of any money paid by a user who notifies you in writing (or by e-mail) within 30 days of receipt that s/he does not agree to the terms of the full Project Gutenberg™ License. You must require such a user to return or destroy all copies of the works possessed in a physical medium and discontinue all use of and all access to other copies of Project Gutenberg™ works.

- • You provide, in accordance with paragraph 1.F.3, a full refund of any money paid for a work or a replacement copy, if a defect in the electronic work is discovered and reported to you within 90 days of receipt of the work.

- • You comply with all other terms of this agreement for free distribution of Project Gutenberg™ works.

1.E.9. If you wish to charge a fee or distribute a Project Gutenberg™ electronic work or group of works on different terms than are set forth in this agreement, you must obtain permission in writing from the Project Gutenberg Literary Archive Foundation, the manager of the Project Gutenberg™ trademark. Contact the Foundation as set forth in Section 3 below.

1.F.

1.F.1. Project Gutenberg volunteers and employees expend considerable effort to identify, do copyright research on, transcribe and proofread works not protected by U.S. copyright law in creating the Project Gutenberg™ collection. Despite these efforts, Project Gutenberg™ electronic works, and the medium on which they may be stored, may contain “Defects,” such as, but not limited to, incomplete, inaccurate or corrupt data, transcription errors, a copyright or other intellectual property infringement, a defective or damaged disk or other medium, a computer virus, or computer codes that damage or cannot be read by your equipment.

1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the “Right of Replacement or Refund” described in paragraph 1.F.3, the Project Gutenberg Literary Archive Foundation, the owner of the Project Gutenberg™ trademark, and any other party distributing a Project Gutenberg™ electronic work under this agreement, disclaim all liability to you for damages, costs and expenses, including legal fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH DAMAGE.

1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a defect in this electronic work within 90 days of receiving it, you can receive a refund of the money (if any) you paid for it by sending a written explanation to the person you received the work from. If you received the work on a physical medium, you must return the medium with your written explanation. The person or entity that provided you with the defective work may elect to provide a replacement copy in lieu of a refund. If you received the work electronically, the person or entity providing it to you may choose to give you a second opportunity to receive the work electronically in lieu of a refund. If the second copy is also defective, you may demand a refund in writing without further opportunities to fix the problem.

1.F.4. Except for the limited right of replacement or refund set forth in paragraph 1.F.3, this work is provided to you ‘AS-IS’, WITH NO OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE.

1.F.5. Some states do not allow disclaimers of certain implied warranties or the exclusion or limitation of certain types of damages. If any disclaimer or limitation set forth in this agreement violates the law of the state applicable to this agreement, the agreement shall be interpreted to make the maximum disclaimer or limitation permitted by the applicable state law. The invalidity or unenforceability of any provision of this agreement shall not void the remaining provisions.

1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the trademark owner, any agent or employee of the Foundation, anyone providing copies of Project Gutenberg™ electronic works in accordance with this agreement, and any volunteers associated with the production, promotion and distribution of Project Gutenberg™ electronic works, harmless from all liability, costs and expenses, including legal fees, that arise directly or indirectly from any of the following which you do or cause to occur: (a) distribution of this or any Project Gutenberg™ work, (b) alteration, modification, or additions or deletions to any Project Gutenberg™ work, and (c) any Defect you cause.

Section 2. Information about the Mission of Project Gutenberg™

Project Gutenberg™ is synonymous with the free distribution of electronic works in formats readable by the widest variety of computers including obsolete, old, middle-aged and new computers. It exists because of the efforts of hundreds of volunteers and donations from people in all walks of life.

Volunteers and financial support to provide volunteers with the assistance they need are critical to reaching Project Gutenberg™’s goals and ensuring that the Project Gutenberg™ collection will remain freely available for generations to come. In 2001, the Project Gutenberg Literary Archive Foundation was created to provide a secure and permanent future for Project Gutenberg™ and future generations. To learn more about the Project Gutenberg Literary Archive Foundation and how your efforts and donations can help, see Sections 3 and 4 and the Foundation information page at www.gutenberg.org.

Section 3. Information about the Project Gutenberg Literary Archive Foundation

The Project Gutenberg Literary Archive Foundation is a non-profit 501(c)(3) educational corporation organized under the laws of the state of Mississippi and granted tax exempt status by the Internal Revenue Service. The Foundation’s EIN or federal tax identification number is 64-6221541. Contributions to the Project Gutenberg Literary Archive Foundation are tax deductible to the full extent permitted by U.S. federal laws and your state’s laws.

The Foundation’s business office is located at 809 North 1500 West, Salt Lake City, UT 84116, (801) 596-1887. Email contact links and up to date contact information can be found at the Foundation’s website and official page at www.gutenberg.org/contact

Section 4. Information about Donations to the Project Gutenberg Literary Archive Foundation

Project Gutenberg™ depends upon and cannot survive without widespread public support and donations to carry out its mission of increasing the number of public domain and licensed works that can be freely distributed in machine-readable form accessible by the widest array of equipment including outdated equipment. Many small donations ($1 to $5,000) are particularly important to maintaining tax exempt status with the IRS.

The Foundation is committed to complying with the laws regulating charities and charitable donations in all 50 states of the United States. Compliance requirements are not uniform and it takes a considerable effort, much paperwork and many fees to meet and keep up with these requirements. We do not solicit donations in locations where we have not received written confirmation of compliance. To SEND DONATIONS or determine the status of compliance for any particular state visit www.gutenberg.org/donate.

While we cannot and do not solicit contributions from states where we have not met the solicitation requirements, we know of no prohibition against accepting unsolicited donations from donors in such states who approach us with offers to donate.

International donations are gratefully accepted, but we cannot make any statements concerning tax treatment of donations received from outside the United States. U.S. laws alone swamp our small staff.

Please check the Project Gutenberg web pages for current donation methods and addresses. Donations are accepted in a number of other ways including checks, online payments and credit card donations. To donate, please visit: www.gutenberg.org/donate.

Section 5. General Information About Project Gutenberg™ electronic works

Professor Michael S. Hart was the originator of the Project Gutenberg™ concept of a library of electronic works that could be freely shared with anyone. For forty years, he produced and distributed Project Gutenberg™ eBooks with only a loose network of volunteer support.

Project Gutenberg™ eBooks are often created from several printed editions, all of which are confirmed as not protected by copyright in the U.S. unless a copyright notice is included. Thus, we do not necessarily keep eBooks in compliance with any particular paper edition.

Most people start at our website which has the main PG search facility: www.gutenberg.org.

This website includes information about Project Gutenberg™, including how to make donations to the Project Gutenberg Literary Archive Foundation, how to help produce our new eBooks, and how to subscribe to our email newsletter to hear about new eBooks.

Table of Contents

- RING SPINNING

- FRANCIS L. LINCOLN.

- Entered according to Act of Congress, in the year 1885, By FRANCIS L. LINCOLN, In the Office of the Librarian of Congress at Washington.

- PREFACE.

- CONTENTS.

- Instruction Book.

- THE FIRST THING.

- DRAUGHTS, TWISTS AND TRAVELERS.

- PACKING YARN ON BOBBINS.

- THREAD GUIDES.

- SPINDLES.

- TOP ROLLS.

- CARRYING.

- LONG STAPLE COTTON.

- ROVING.

- TWO-ROVING.

- DOUBLE WORK.

- WASTE.

- UNEVEN WORK.

- BUNCHES.

- COARSE THREADS.

- CHANGING NUMBERS.

- POOR COTTON.

- ECONOMY OF HEAVY TRAVELERS.

- KNITTED YARN.

- SNARLED YARN.

- LAP WASTE.

- ROVING WASTE.

- PICKING UP WASTES.

- COLORED WORK.

- DOFFING.

- SPEED OF CYLINDER.

- SPEEDING PULLEYS.

- TAKING UP BELTS.

- TWISTS.

- SQUARE ROOT.

- DRAUGHT FOR YARN.

- GEAR REQUIRED.

- ROVING REQUIRED.

- TO FIND DRAUGHT CHANGE GEAR.

- TWIST GEAR.

- TWIST PULLEY.

- TWIST OF YARN.

- WEIGHT ON TOP ROLLS.

- SQUARE ROOT TABLE FOR THE TWIST OF YARNS.

- Price One Dollar.

- THE FULL PROJECT GUTENBERG LICENSE